Códigos de Construcción

01516  
Autor: Decanini, Luis D; Payer, Alfredo; Ochat, Ernesto.
Título: Mampostería encadenada : Estudio dirigido a la verificación del actual reglamento Argentino.
Fuente: México, D.F, México; abr. 1991
Resumen: Se incluyen algunos aspectos normativos para el diseño sismorresistente de la mampostería contenidos en la parte III del Reglamento INPRES-CIRSOC103 (actual reglamento argentino). Se examina lo relativo a la determinación de parámetros básicos de resistencia de la mampostería (a compresión y al corte). Luego se describen y analizan los ensayos realizados sobre muros de mampostería encadenada (con y sin aberturas) aplicando cargas horizontales reversibles. Se estudia el comportamiento resistente histerético y deformacional. También se presentan los resultados obtenidos sobre algunos de los especímenes que fueron reparados con acero y microconcreto y posteriormente ensayados. Finalmente se formulan algunas conclusiones derivadas de los estudios realizados referidos al comportamiento sismorresistente de la mampostería.
Tema: MATERIALES DE CONSTRUCCION / ARGENTINA / CODIGOS DE EDIFICACION. legis / POLITICA DE VIVIENDA
 
   
03298  
Autor: Winkel, S. R.
Título: Methods for development of building codes and disaster recovery measures.
Fuente: México, D. F, MX; 1992
Resumen: The reduction of the impact of an earthquake disaster involves planning for mitigation of earthquake effects both before and after the seismic event. Building codes provide the basis for implementation of pre-event measures to minimize the impact of an earthquake. Planning can also facilitate recovery after such an event and minimize long term impacts upon society. The paper will suggest methodologies to be used in the development of building codes which can encourage the use of local building practices while developing safer standards for construction. The discussion will focus on the processes used in the United States to formulate building codes and on the application of these processes to formulation of codes appropriate for developing nations. The paper will also explore disaster recovery through the training of personnel to perform post earthquake evaluation of damaged structures to ascertain levels of damage and suitability for occupancy (AU)
Tema: TERREMOTOS / CODIGOS DE EDIFICACION / INGENIERIA / EVALUACION DE DAÑOS
 
   
05994  
Autor: Key, David.
Título: Seismic design codes : Philosophy, application and effectiveness.
Fuente: St. Augustine, TT; 11-15 Oct.1993
Resumen: The multi-level philosophy applied in typical seismic design codes and its implications are described. The principal areas of concern are ground motion estimates, selection of structure modification factors, infill, live load, soil structure interaction, capacity design, structural concept and education and awareness. Brief outlines of four seismic structural codes are given - UBC91, Eurocode 8, NZS 4203:1992 and CUBiC.(AU)
Tema: TERREMOTOS / INDUSTRIA DE LA CONSTRUCCION / INGENIERIA / LEGISLACION
 
   
06512  
Autor: Meli Piralla, Roberto.
Título: El diseño sísmico de acuerdo al reglamento de construcciones para el Distrito Federal.
Fuente: México, D.F, MX; feb. 1995
Tema: INDUSTRIA DE LA CONSTRUCCION / CODIGOS DE EDIFICACION / TERREMOTOS / LEGISLACION / MEXICO
 
   
06515  
Autor: Mendoza López, Manuel J.
Título: Acerca de la normatividad para el diseño y construcción de cimentaciones en la ciudad de México.
Fuente: México, D.F, MX; feb. 1995
Tema: TERREMOTOS / LEGISLACION / INDUSTRIA DE LA CONSTRUCCION / CODIGOS DE EDIFICACION / INGENIERIA / EVALUACION
 
   
08174  
Autor: Martin, Geoffrey R; Dobry, Ricardo.
Título: Earthquake site response and seismic code provisions.
Fuente: Buffalo, N.Y, US; Sept. 1994
Resumen: In current versions of guidelines or buildings codes for seismic design, site effects are accounted for through four soil factors which modify the shape of normalized acceleration response spectra recommended for use in design. This basic format was developed as part of an Applied Technology Council study in the early 1970's, and is the basis for the current versions of most seismic design codes. Over the past 20 years, numerous concerns have been expressed about both the limitations and code language dealing with site effects, including the lack of a precise definition of site categories.(AU)
Tema: TERREMOTOS / INGENIERIA. métodos / CODIGOS DE EDIFICACION / MITIGACION PREVIA AL DESASTRE
 
   
09208  
Autor: López Bátiz, Oscar.
Título: Estructuras de concreto reforzado (1): Aspectos fundamentales sobre elementos viga y columna, comentarios sobre estructuras de cimentación.
Fuente: México, D.F, MX; sep. 1994
Tema: INGENIERIA / TERREMOTOS / MATERIALES DE CONSTRUCCION / MEDIDAS DE SEGURIDAD
 
   
09363  
Autor: Grases Galofre, José.
Título: Diseño sismorresistente : Especificaciones y criterios empleados en Venezuela.
Fuente: Caracas, VE; jul. 1997
Tema: CODIGOS DE EDIFICACION / INGENIERIA. métodos / INGENIERIA. normas / VENEZUELA / LEGISLACION. normas
 
   
09383  
Autor: Anon.
Título: Edificaciones antisísmicas.
Fuente: Caracas, VE; jul. 1997
Tema: CODIGOS DE EDIFICACION / INGENIERIA. métodos / VENEZUELA / ZONIFICACION / ANALISIS DE RIESGO / TERREMOTOS
 
   
09388  
Autor: Anon.
Título: Especificación técnica sobre requerimientos antisísmicos.
Fuente: Caracas, VE; jul. 1997
Tema: INDUSTRIA DE LA CONSTRUCCION / CODIGOS DE EDIFICACION / LEGISLACION. normas / VENEZUELA / ZONIFICACION / EVALUACION
 
   
10297  
Autor: Wason P., Alwyn T.
Título: Building code.
Fuente: s.l, LC; s.d
Tema: CODIGOS DE EDIFICACION / INDUSTRIA DE LA CONSTRUCCION / LEGISLACION. normas / MATERIALES DE CONSTRUCCION. normas / REGION DEL CARIBE / TECNICAS DE PLANIFICACION
 
   
11527  
Autor: Guevara P., Teresa L.
Título: Recomendaciones para crear diseños arquitectónicos sismo resistente a la luz de la nueva norma colombiana NSR - 98.
Fuente: Caracas, VE; 1998
Resumen: En zonas sísmicas, el contexto de la edificación está definido por la amenaza sísmica. Conocer la influencia que posibles configuraciones arquitectónicas tienen en el compartimiento sismo resistente de las edificaciones, permitirá diseñarlas menos vulnerables en un contexto sísmico. La responsabilidad de cumplir con las normas sísmicas ha recaído tradicionalmente en el ingeniero estructural. La nueva norma colombiana NSR-98, introduce recomendaciones y responsabilidades para los arquitectos, lo cual significa un cambio en su ejercicio profesional. este trabajo describe configuraciones arquitectónicas que influyen en el comportamiento sismo resistente de las edificaciones referidas a esta nueva norma. (AU)
Tema: CODIGOS DE EDIFICACION / ARQUITECTURA. normas / LEGISLACION. normas
 
   
13274  
Autor: American Society of Civil Engineers (ASCE).
Título: Minimum design loads for buildings and other structures.
Fuente: s.l, 1998
Resumen: ASCE standard, Minimun Design Loads for Buildings and Other Structures (ASCE 7-98), gives requirements for dead, live, soil, flood, wind, snow, rain, ice, and earthquake loads, and their combinations, that are suitable for inclusion in building codes and other documents. ASCE 7-98 is a revision of ASCE 7-95. Substancial changes were made to the wind, snow, earthquake, and ice provisions. In addition, substancial new material was added regarding the determination of flood loads. The structural loading requirements provided by this standard are intended for use by architects, structural engineers, and those engaged in preparing and administering local building codes. (AU)
Tema: INDUSTRIA DE LA CONSTRUCCION / MATERIALES DE CONSTRUCCION. normas / INGENIERIA CIVIL / REFORZAMIENTO DE ESTRUCTURAS / CODIGOS DE EDIFICACION
 
   
13829  
Autor: Valladares, Miguel R.; Alvarado E., Marcio; Castillo, Leonel; Rivera, Renán; Chavez, José Orlando;
Título: Código hondureño de construcción : Reglamentación de construcción y normas técnicas complementarias.
Fuente: s.l, 2000
Tema: CODIGOS DE EDIFICACION / LEGISLACION / REGULACION Y CONTROL DE INSTALACIONES. legis / HONDURAS / INDUSTRIA DE LA CONSTRUCCION / MATERIALES DE CONSTRUCCION